Official Luthiers Forum! • View topic

Board index » Forum Archive

All times are UTC - 5 hours

MichaelP reminder!!!

Page 1 of 1

[ 10 posts ]

Print view

Previous topic | Next topic

Author

Message

L. Presnall

Post subject:

Posted: Sat Oct 15, 2005 3:05 am

Contributing Member

Joined: Wed Feb 02, 2005 3:14 am
Posts: 2590
Location: United States

Hey Michael! Remember when you said you'd need reminding to draw up plans for the Pwoolson/Brock neck angle jig? Well.....

Larry

_________________
http://www.presnallguitars.com

Top

Brock Poling

Post subject:

Posted: Sat Oct 15, 2005 3:11 am

Old Growth Brazilian Rosewood

Joined: Mon Dec 27, 2004 1:20 pm
Posts: 5915
Location: United States

The only credit I can take for that jig is letting the cat out of the bag and telling you about it.

It is Paul's adaptation of a Charles Fox design.

_________________
Brock Poling
Columbus, Ohio
http://www.polingguitars.com

Top

Michael Dale Payne

Post subject:

Posted: Mon Oct 17, 2005 12:19 am

Old Growth Brazilian

Joined: Tue Dec 28, 2004 1:56 am
Posts: 10707
Location: United States

I have to say I kinda droped the ball on that...my bad I got cought up in toomany things late this summer. I will ge on it first of next week.

Top

Pwoolson

Post subject:

Posted: Mon Oct 17, 2005 12:53 am

Brazilian Rosewood

Joined: Sat Jan 08, 2005 1:26 am
Posts: 2558
Location: United States

Hey Michael. I'm in the process of teaching myself CAD so why don't I draw it up? It will give me practice and take the burden off of you. I'll get on it right away. P

Top

L. Presnall

Post subject:

Posted: Mon Oct 17, 2005 1:00 am

Contributing Member

Joined: Wed Feb 02, 2005 3:14 am
Posts: 2590
Location: United States

3 for PW!

_________________
http://www.presnallguitars.com

Top

Michael Dale Payne

Post subject:

Posted: Mon Oct 17, 2005 1:16 am

Old Growth Brazilian

Joined: Tue Dec 28, 2004 1:56 am
Posts: 10707
Location: United States

[QUOTE=Pwoolson] Hey Michael. I'm in the process of teaching myself CAD so why don't I draw it up? It will give me practice and take the burden off of you. I'll get on it right away. P[/QUOTE]

Ok Paul. So Autocad or what?

Top

Pwoolson

Post subject:

Posted: Mon Oct 17, 2005 1:18 am

Brazilian Rosewood

Joined: Sat Jan 08, 2005 1:26 am
Posts: 2558
Location: United States

Rhino 3D. I'm not sure it will give the results expected from "plans" but it will be buildable from these designs.

Top

Michael Dale Payne

Post subject:

Posted: Mon Oct 17, 2005 1:29 am

Old Growth Brazilian

Joined: Tue Dec 28, 2004 1:56 am
Posts: 10707
Location: United States

It will do fine if you can draw lines and dimension them is all tha matters!

Top

JJ Donohue

Post subject:

Posted: Mon Oct 17, 2005 1:20 pm

Brazilian Rosewood

Joined: Mon Dec 27, 2004 3:50 pm
Posts: 4662
Location: Napa, CA

Bravo!!! Thanks to both of you ...I've been wanting to build this jig for some time. Looking forward to the drawing and the consistency it will provide in my next efforts.

_________________
JJ
Napa, CA
http://www.DonohueGuitars.com

Top

Don A

Post subject:

Posted: Mon Oct 17, 2005 1:47 pm

Koa

Joined: Wed Dec 29, 2004 3:48 pm
Posts: 1478
First name: Don
Last Name: Atwood
City: Arlington
State: Virginia
Country: USA
Focus: Build
Status: Amateur

[QUOTE=JJ Donohue] Bravo!!! Thanks to both of you ...I've been wanting to build this jig for some time. Looking forward to the drawing and the consistency it will provide in my next efforts. [/QUOTE]
That makes 2 of us

. I'd also like to see pictures of the jig in actual use.

_________________
Don Atwood
Arlington, VA

Top

Page 1 of 1

[ 10 posts ]

Board index » Forum Archive

All times are UTC - 5 hours

Who is online

Users browsing this forum: No registered users and 16 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: